New Multi-Scale Hybrid System Based on Maple Wood Flour and Nano Crystalline Cellulose: Morphological,Mechanical and Physical Study

In the first part of this work, composites based on polypropylene (PP) and maple wood flour (MF) were prepared by melt compounding using twin-screw extrusion followed by compression molding. The morphological and mechanical properties of the composites were analyzed for three samples: PP, MF/PP and MF/PP containing maleic anhydride grafted polypropylene (MAPP) as coupling agent. The results showed that MF/PP composites have improved mechanical properties, especially tensile modulus (+33 %), with only 8 % increase in density. The addition of MAPP further improved the mechanical properties, in particular tensile modulus (up to 51 %), which could be related to better fiber/matrix adhesion. In the second step, nano crystalline cellulose (NCC) was added to all samples to produce NCC-MF/PP hybrid composites. From the mechanical analysis performed, the hybrid composites with MAPP have improved properties, especially tensile (+53 %) and flexural (+40 %) moduli. These results confirmed that multi-scale hybrid NCC-MF composites can substantially improve the mechanical properties of polyolefins with limited increase in density (14 %) leading to high specific properties.     

A SIPHON GAGE FOR MONITORING SURFACE-WATER LEVELS1

A device that uses a siphon tube to establish a hydraulic connection between the bottom of an onshore standpipe and a point at the bottom of a water body was designed and tested for monitoring surface-water levels. Water is added to the standpipe to a level sufficient to drive a complete slug of water through the siphoning tube and to flush all air out of the system. The water levels in the standpipe and the water body equilibrate and provide a measurable static water surface in the standpipe. The siphon gage was designed to allow quick and accurate year-round measurements with minimal maintenance. Currently available devices for monitoring surface-water levels commonly involve time-consuming and costly installation and surveying, and the movement of reference points and the presence of ice cover in cold regions cause discontinuity and inaccuracy in the data collected. Installation and field testing of a siphon gage using 0.75-in-diameter polyethylene tubing at Ashumet Pond in Falmouth, Massachusetts, demonstrated that the siphon gage can provide long-term data with a field effort and accuracy equivalent to measurement of ground-water levels at an observation well.     

Decontamination of Fly Ash and Used Lime from Municipal Waste Incinerator Using Thiobacillus ferrooxidans

Thiobacillus ferrooxidans to leach metals from APCR to render them nonhazardous. The multistage solubilization process involves an alkaline aqueous phase that removes some Pb. In the second phase, the APCR are acidified to pH 4 with H₂SO₄, then inoculated with a bacterial culture that has been acclimated in the presence of 2% Fe (FeCl₃). Several rinses and decantings achieve removal of the leachable metals. The final step involves the addition of Ca(H₂PO₄)₂ and an increase in the treatment pH prior to the final filtration. Viability of thiobacilli in APCR was poor. Despite this problem, the removal of Pb was 35.9%, 46.0%, and 68.7% (for APCR containing 1594, 3026, and 5038 mg Pb/kg, respectively), which demonstrates greater metal removal with increased APCR contamination. Zn removal varied from 68.2% (8273 mg Zn/kg APCR) to 79.5% (16,873 mg Zn/kg APCR), which was positively correlated to the level of residue contamination, whereas Cu was removed in the proportions of 26.9% (495 mg Cu/kg APCR) to 68.2% (465 mg Cu/kg APCR). Cadmium removal appeared to be independent of the level of Cd in the APCR; Cd was removed to the greatest degree, with a variation of 92.0% (129 mg Cd/kg APCR) to 94.7% (267 mg Cd/kg APCR). The treated APCR were tested using four different leachate tests. The APCR released 43 mg Pb/liter during contact with water, and 7.40 mg Cd/liter during TCLP [the toxicity characterization leaching procedure of the United States Environmental Protection Agency (US EPA)]. After biological treatment, the leachate from TCLP was within the acceptance criteria of the US EPA, if the pH of the APCR was increased to pH 5 after the biological treatment. In the case of the Transport Canada leaching test, a betterment of the process is required in order to satisfy the stringent regulatory level of 0.5 mg Cd/liter (0.68 and 0.57 mg/liter).     

Ecological risk assessment of metal and hydrocarbon pollution in sediments from an urban tropical estuary: Tijuca lagoon (Rio de Janeiro,Brazil)

Environmental Science and Pollution Research - Urban tropical lagoons are often impacted by eutrophication, metal, and polycyclic aromatic hydrocarbon (PAH) contamination, but the toxicity of their...     

Indigenous capacity for collaboration in Canada’s energy,forestry and mining sectors: research metrics and trends

This paper examines patterns in recently published research addressing Indigenous capacity for collaborative natural resource development in Canada’s forestry, energy, and mining sectors. As Indigenous involvement in natural resource development increases, so too does the body of associated scholarship. We gathered information on several core metrics (year of publication, authorship, and gender, author affiliation, journal titles, citation counts and impacts factors, and keywords) to analyze research output, trends, and gaps. Our bibliometric analysis of 49 articles from peer-reviewed journals confirms that Indigenous natural resource development and capacity research has steadily increased over the past decade in terms of the number and range of papers, authors, institutions, and cases examined. Research output peaked in 2013 and 2015. Authorship is distributed evenly between male and female lead researchers, with teams located across southern Canada, with highest concentrations in urban population centers of British Columbia, Manitoba, and Ontario. In contrast, the research sites are located in more northern, rural, and remote locations. That communities and projects under study are not currently matched with sites of research capacity raises questions about capacity building and the nature of research “on” versus “with” Indigenous peoples. Policies and programs designed to enhance Indigenous involvement and capacity must address these asymmetries in order to be representative, effective, and responsive to current Indigenous priorities.     

Gaseous nitrogen emissions and forage nitrogen uptake on soils fertilized with raw and treated swine manure

Treatments to reduce solids content in liquid manure have been developed, but little information is available on gaseous N emissions and plant N uptake after application of treated liquid swine manure (LSM). We measured crop yield, N uptake, and NH3 and N2O losses after the application of mineral fertilizer (NH4 NO3), raw LSM, and LSM that was decanted, filtered, anaerobically digested, or chemically flocculated. The experiment was conducted from 2001 to 2003 on a loam and a sandy loam cropped to timothy (Phleum pratense L.) with annual applications equivalent to 80 kg N ha(-1) in spring and 60 kg N ha(-1) after the first harvest. Raw LSM resulted in NH3 emissions three to six times larger (P < 0.05) than mineral fertilizer. The LSM treatments reduced NH3 emissions by an average of 25% compared with raw LSM (P < 0.05). The N2O emissions tended to be higher with raw LSM than with mineral fertilizer. The LSM treatments had little effect on N2O emissions, except for anaerobic digestion, which reduced emissions by >50% compared with raw LSM (P < 0.05). Forage yield with raw LSM was >90% of that with mineral fertilizer. The LSM treatments tended to increase forage yield and N uptake relative to raw LSM. We conclude that treated or untreated LSM offers an alternative to mineral fertilizers for forage grass production but care must be taken to minimize NH3 volatilization. Removing solids from LSM by mechanical, chemical, and biological means reduced NH3 losses from LSM applied to perennial grass.     

A structural equation model to integrate changes in functional strategies during old-field succession

From a functional perspective, changes in abundance, and ultimately species replacement, during succession are a consequence of integrated suites of traits conferring different relative ecological advantages as the environment changes over time. Here we use structural equations to model the interspecific relationships between these integrated functional traits using 34 herbaceous species from a Mediterranean old-field succession and thus quantify the notion of a plant strategy. We measured plant traits related to plant vegetative and reproductive size, leaf functioning, reproductive phenology, seed mass, and production on 15 individuals per species monitored during one growing season. The resulting structural equation model successfully accounts for the pattern of trait covariation during the first 45 years post-abandonment using just two forcing variables: time since site abandonment and seed mass; no association between time since field abandonment and seed mass was observed over these herbaceous stages of secondary succession. All other predicted traits values are determined by these two variables and the cause-effect linkage between them. Adding pre-reproductive vegetative mass as a third forcing variable noticeably increased the predictive power of the model. Increasing the time after abandonment favors species with increasing life span and pre-reproductive biomass and decreasing specific leaf area. Allometric coefficients relating vegetative and reproductive components of plant size were in accordance with allometry theory. The model confirmed the trade-off between seed mass and seed number. Maximum plant height and seed mass were major determinants of reproductive phenology. Our results show that beyond verbal conceptualization, plant ecological strategies can be quantified and modeled.     

Improvement of sampling strategies for randomly distributed hotspots in soil applying a computerized simulation considering the concept of uncertainty

Introduction  

The pollution of soil and environment as a result of human activity is a major problem. Nowadays, the determination of local contaminations is of interest for environmental remediation. These hotspots can have various toxic effects on plants, animals, humans, and the whole ecological system. However, economical and juridical consequences are also possible, e.g., high costs for remediation measures.     

Analytical model for site-specific isotope fractionation in 13C during sorption: determination by isotopic 13C NMR spectrometry with vanillin as model compound

The aim of this study was to conceive a reactive transport model capable of providing quantitative site-specific enrichment factors for fractionation in ¹³C isotopic content during sorption. As test compound the model treats vanillin, for which the ¹³C isotopic content at natural abundance at each of the 8 carbon positions can be measured by quantitative ¹³C nuclear magnetic resonance spectrometry. This technique determines the isotope ratios with a resolution better than ±1‰ (0.1%) at each carbon position. Site-specific isotope fractionations were recorded in chromatography column experiments with silica RP-18 as stationary phase. The one dimensional reactive transport model accounted for the sorption/desorption behavior of 8 individual ¹³C-isotopomers and one ¹²C-isotopomer of vanillin and reproduced satisfactorily the bulk (average over the whole compound) fractionation observed during elution. After model calibration, the enrichment factors were fitted for each carbon site where a significant fractionation was recorded. To show the interest of such a transport model for environmental studies, the model, extended to three dimensions, was exploited to simulate reactive transport in an aquifer. These results show that significant ¹³C isotope fractionation is expected for 4 out of 8 ¹³C-isotopomers in vanillin, and illustrate that bulk isotope ratios measured by conventional compound specific isotope analysis and mass spectrometry would hardly document significant isotope fractionations in vanillin. It is concluded that modeling of site-specific isotope ratios in molecules is a priori feasible and may help to quantify unknown processes in the environment.     

Effects of nozzle types and 2,4-D formulations on spray deposition

The objective of this study was to evaluate the effects of nozzle types and 2,4-D formulations on spray deposition on different targets. Two field experiments were carried out in a completely randomized design, and treatments were arranged in a factorial scheme. Species in experiment 1 were Sumatran fleabane (Conyza sumatrensis) and Brazil pusley (Richardia brasiliensis) and in experiment 2 were soybeans (Glycine max) and Benghal dayflower (Commelina benghalensis). For both experiments, the first factor corresponded to spray nozzles with different settings (AD 110.015 – 61 and 105 L ha^?1; AD 015-D – 75 and 146 L ha^?1; XR 110.0202 – 200 L ha^?1; and ADIA-D 110.02 – 208 L ha^?1) and the second factor consisted of two formulations of 2,4-D (amine and choline). The formulation of 2,4-D choline has contained Colex-D? Technology. Similar or higher spray deposition was observed on the leaves and artificial targets when using 2,4-D choline as compared to the 2,4-D amine formulation, and these differences in deposition were more evident for nozzles applying lower spray volumes. Deposition was more affected by nozzle type when amine formulation was used, compared to choline formulation.